Prefinished Hardwood Floors Versus Unfinished Hardwood Floors

By Adele Joy

Deciding between prefinished hardwood floors versus unfinished hardwood floors can be difficult. You need to consider the pros and cons of each before making a decision.

Unfinished hardwood flooring is delivered raw then sanded, stained and finished on site. It is available in more widths and wood species than prefinished hardwood floors and can be matched to existing wood floors.

Prefinished hardwood floors have been engineered and finished at the factory, so they do not require any further treatment once installed.

Prefinished hardwood flooring is relatively quick easy to install. Since it has already been coated at the factory, it is also far more convenient as no sanding or finishing needs to be done on site. This is a time consuming and dusty process that you may wish to avoid.

The multiple coats of finish applied at the factory give prefinished wood flooring a very durable wear layer and the finish itself is under warranty by the manufacturer. Such a durable finish can't be achieved on floors finished on the job site.

images/hardwood_floors-1.jpgPrefinished hardwood floors are more versatile as they can be installed over a wider range of subfloors than unfinished hardwood floors. Because prefinished flooring can be floated, that is, not attached to the subfloor, they can be installed over almost any type of subfloor including concrete. Also, the durable coating on prefinished flooring and its engineered design makes it more resistant to moisture and humidity, making it suitable for climatic regions with high humidity or large variations in temperature, or when the subfloor is below grade and more prone to moisture.

However, when refinishing engineered prefinished flooring, it is necessary to remove a lot more wood to achieve a level floor, so you will lose more life of the floor in the first refinish than with a solid hardwood floor. Also prefinished hardwood floors are harder to clean between the cracks, as they are not sealed at the job site like unfinished hardwood floors.

Wood flooring is timeless; it is a natural resource, renewable and recyclable. For natural beauty, it's hard to beat the warmth of real hardwood flooring. Wood floors are available in solid one-piece boards or in the form of engineered wood. This composite consists of a hardwood veneer top-layer laminated to lower layers of softwood backing that inhibit warping.

A custom sanded hardwood floor is perfectly flat looking, with a tabletop appearance that can't be achieved with a prefinished hardwood floor. If the subfloor is uneven, then a pre-finished floor will be uneven. Since unfinished flooring is sanded flat on site, it is more forgiving of slight irregularities in the subfloor.

If your prefinished floor is damaged, the whole section of flooring will need to be removed and replaced, whereas in most cases, site finished hardwood flooring can be easily fixed with a quick sanding and finish.

Over time, it is easy to forget who the manufacturer of the prefinished hardwood flooring is, making it difficult to get an exact match if part of the floor needs to be replaced. There is also the possibility that your prefinished flooring will be discontinued in the future and so you will be unable to order replacement boards.

There are several factors to consider which should make your decision a little easier:

• Is your home of historical significance? Unfinished flooring would be more appropriate - to capture the old-world charm and keep the look authentic, or to match existing historical flooring, hand-distressing and aging techniques can be used.

• Are the fumes and dust resulting from finishing the floor on-site a concern, eg if children or pets will be present?

• Consider the location of your new wood floor - will it be in a high traffic or moisture area such as the kitchen or bathroom? If so, prefinished flooring is best as it has a more durable finish.

• Are you looking for a specific plank width, unusual wood species or color? Unfinished wood provides many more options.

• Are you installing wood floors throughout the entire home, or just in isolated rooms? If throughout your home, unfinished wood may be best. Having your floors finished on site will help ensure a uniform color and finish.

• What type of installation technique is required? Only prefinished flooring can be floated above a concrete sub floor. If the flooring is to be installed below grade, prefinished flooring is the recommended choice.

• Does your new wood floor need to match with an existing wood floor? If so, unfinished flooring is easier to stain and match.

• What is your budget? Unfinished flooring is typically the more expensive option.

• Do you live in an area with high humidity? If so, prefinished flooring is the better option as it is more resistant to buckling and warping. http://tamalpaishardwoodfloors.com http://www.thehardwoodfloorguys.com/prefinished.html

Article Source: http://EzineArticles.com/?expert=Adele_Joy http://EzineArticles.com/?Prefinished-Versus-Unfinished-Hardwood-Floors&id=1277694

Technorati Tags: how to refinish hardwood floors, how to install hardwood floors, how to clean hardwood floors, how to care for hardwood floors, how to sand hardwood floors, how to finish hardwood floors, how to finish hardwood floors, bruce hardwood floors

More Technorati Tags: Unfinished Hardwood Floors, Prefinished Hardwood Floors, Unfinished hardwood flooring, prefinished wood flooring, sanded hardwood floor, hand-distressing, unfinished wood

Hardwood Flooring Questions Answered

Why do people sand harwood floors to refinish them?

Sanding Hardwood Floors is a good way to make sure that the wood will be smooth and level. Sanding hardwood floors is a long process that can take up to couple of days. Even if you do end up hiring a professional for the job, it will still include many small jobs for you such as cleaning the dust and other such things. Sanding hardwood floors is one job that can be done by homeowners, but it can be tricky. Start in an out-of-the way room where early mistakes will not be much noticed.

Why do people say that for DIY-ers Prefinished Hardwood Floors are best?

Prefinished hardwood floors are suitable for do-it-yourself homeowners because once it is installed the floor is ready to be used. Prefinished hardwood floors are products that are factory finished. Once installed they can be walked on, furniture moved in and you're ready to go. Furthermoew, prefinished hardwood floors are available in a myriad of color choices from light maple and knotty pine to the darkest of cherry or walnut. Within the wood species there is also a lot of variance in grain pattern, which can add a lot of character to your floor, and the prefinsher will usually be very good at bringing out the best from the wood.

Our recommended related pages:

how to refinish hardwood floors